v0.9.9
Release Date: 07.02.2025
New Tools added
- 3D Views To IFC
- 3D Connect
General
- Icons have been redesigned
- Eklenty windows now open in the middle of whereever Revit window is located
Sheet Bridge
- Fixed the issue causing an error when a Parameter value is supposed to refer another Element. (e.g. View Template of a View element)
System Members
- Now supporting Insulation elements
Select System
- Now supporting Insulation elements
Connect Nearest
- Connected connector size of the element no longer changes in case the change affects another connector of the same element. (e.g. Tee Fitting pieces that isnt configured to have different connector sizes on straight ends)
AutoCut
- Improved reliability with multiple bug fixes
- Building components are now listed only if they are in use
v0.9.8.1
Release Date: 14.12.2025
New Tools added
- Clash Manager
- AutoCut
- ReSlot
- Affecting Filters
- Linked Elements
Sheet Bridge
- Resolved the issue causing Type Parameters to be exported in the wrong colour code
Transition Connect
- Bug Fixes
3D Insert
- Resolved the issue causing an error when the tool is used for Conduits
Update Notifier added
- When the new version is released you will get a message once you launch Revit.
v0.9.7
Release Date: 12.09.2025
Sheet Bridge
- Resolved the issue causing error when importing enumerated values.
- Minor improvements
3D Insert
- Bug fixes
v0.9.6
Release Date: 03.07.2025
New Tool - Disconnect
- Total Disconnect
- Mutual Disconnect
Tee Fixer
- Resolved the issue causing an error when a duct, connected to a port of the Tee fitting, is shorter than certain value.
- Resolved the issue causing an error when Tee has a round duct connected to it.
3D Insert
- Resolved the issue causing an error when round duct is involved.
- Bug fixes
v0.9.5
Release Date: 09.06.2025
System Updates
- Starting from this version, Eklenty supports Revit 2026
New Tool - Find In Views
- Find In Floor Plans
- Find In Sections
- Find In Elevations
- Find In Sheets
- Find In 3D Views
- Find In Schedules
- Find In All Views
Sheet Bridge
- Resolved an issue causing an error when the tool starts when a Multiple Category schedule is the active view
- Resolved the issue causing an error when importing changes of element categories that don't have Element Type definitions (e.g., Space instances)
3D Insert
- Resolved the issue where creation of a curve element causes an error when the element's length is under tolerance level
- Minor improvements and bug fixes
Align Gauge
- Tolerance of X and Y axis offset increased
Why No See?
- Resolved the issue that causes the tool to fail when a view filter criteria is left empty
Connect Nearest
- Connector pairs forming an angle less than 165° will be ignored
Sub Components
- Now also works for already selected elements instead of selecting everything from scratch
- Will also select nested elements under other nested elements
v0.9.4
Release Date: 06.05.2025
Sheet Bridge
- Resolved an issue where importing type parameters causing error.
- Integer or Number type of parameter values are now imported as 0, when their excel cells are left blank.
3D Insert
- Resolved the issue when connecting 2 off-centered Ducts with Tap (Takeoff) Fitting causes an error.
Buttons
- Resolved the issue causing icon of Eklenty Button to disappear once the theme is changed in Revit 2024 and 2025
v0.9.3 the First Open Beta Release
Release Date: 28.04.2025
Transition Connect
- Now also supports Mechanical Equipments with duct connections.
- Resolved the issue where aligned same size ducts causing Revit 2025 to crash
Connect Nearest
- Now the tool also changes the size of the connector of Family instances, if the connector sizes are associated to an instance parameter.
TeeFixer
- Resolved an issue that caused incorrect sizing of vertically oriented Tee fitting instances.
- Resolved the issue where Rectangular to Round connections causes exception.
- Resolved the issue causing Revit 2025 crash in rare cases.
Sheet Bridge
- Resolved an issue where importing blank cells caused interpretation errors.
- The category of each schedule is now displayed in the UI, and the list can also be sorted by category.
- Resolved an issue where numerical values were exported with floating-point precision errors instead of properly rounded values.
- General UI improvements.
Why No See?
- Support added for hidden Category Types (Model, Annotation, Imported etc.).
Eklenty Button Added
- About: Learn about Eklenty. Help: View user documentation. Update: Check for latest version. Contact: Reach out via email. LinkedIn: Visit Eklenty LinkedIn page.
Installer renewed
- T&C added to the installation process
v0.9.2
Build Date: 23.03.2025
New Tools
- Why No See?
- Restore Hidden
- Pin/Unpin Views
Sheet Bridge
- It is now safe to export Material Take-Off Schedules. Import function is still under development.
v0.9.1
Build Date: 09.03.2025
Connect Nearest
- Distance tolerance for ductwork elements is changed to 40 mm.
- Only connector of the flex ducts and flex pipes will be moved during connection
- Resolved the issue where curve elements in certain conditions dragging the element connected to them while moving.
- Bug fix
Leapfrog
- Bug fix
Transition Connect
- Resolved the issue causing an error when elements selected with connectors facing away from each other.
v0.9.0 Early Access Release
Build Date: 23.02.2025
Connect Nearest
- Resolved the issue where very short elements causing error.
v0.8.8
Build Date: 16.02.2025
3D Corner
- Tool relocated to Productivity panel.
- Object selection algorithm has been modified so that it won't allow selection of Insulation elements.
- Tool automatically applies insulation based on selected elements.
3D Insert
- Tool relocated to Productivity panel.
- Object selection algorithm has been modified so that it won't allow selection of Insulation elements.
- Tool automatically applies insulation based on selected elements.
Intersect
- Resolved the issue causing an error when perpendicular elements are selected.
Transition Connect
- Tool now disallows selection of 2 elements that are impossible to connect with a transition.
- Tool now disallows selection of same element in both selection.
v0.8.7
Build Date: 09.02.2025
New Tools
- 3D Corner tool
- 3D Insert tool
v0.8.6
Build Date: 07.02.2025
Leapfrog
- Transaction renamed to Leapfrog.
ToggleInsulation
- Resolved the issue where the tool throws an exception when a 3D view graphic settings are controlled by a View Template.
Eklenty Console
- Clear button moved so that it won't overlap the scroll bar.
Sheetbridge
- Default folder has been replaced.
v0.8.5
Build Date: 02.02.2025
Sheetbridge
- Indirect user created parameters are now supported (eg. user created Room instance parameters, Space instance parameters etc.).
v0.8.4
Build Date: 26.01.2025
Sheetbridge
- Bug fixed where a Family Type change returns different Family with the same type name.
- When an element doesn't exist in the model add-in reports the issue.
Intersect
- no longer allows selection of duct and pipe insulation.
Eklenty Console
- Clear button added.
v0.8.3
Build Date: 05.01.2025
Intersect
- Licensing tools added.
Sheetbridge
- Licensing tools added.
Leapfrog
- Licensing tools added.
SprinklerPack
- Licensing tools added.
v0.8.2
Build Date: 04.01.2025
Eklenty Essentials
- Package sent to Autodesk for review.
v0.8.1
Build Date: 03.01.2025
SheetBridge
- Key Schedules are now also supported.
- Integer based String parameters are now fully supported (eg. "Condition Type" parameter of Space instances).
- Resolved the issue where an empty schedule list can still be exported.
FreePack
- Now renamed to Essentials.
Buttons
- They now disable or enable based on the type of the document.
v0.8.0
Build Date: 29.12.2024
Revit 2025 Compatibility
- Eklenty now compatible with Revit 2025.
v0.7.9
Build Date: 28.12.2024
Pulldown Buttons
- Resolved an issue where the Split Button icons wouldn't change their colors when the theme is changed in Revit 2024.
SheetBridge
- Resolved an issue where the first Integer based string parameter in the sheet getting ignored during import session.
v0.7.8
Build Date: 26.12.2024
Leapfrog
- Bug fix where a multi-system mechanical equipment gets involved with the selection and moves more than once.
SelectFamily
- Bug, causing exception when incompatible element is selected, is now resolved.
- Legend Components are also can now be selected as reference element. The result will, however, exclude the legend component after running the tool.
- Select Family tool is now split into 2 different tools: Select All Family, Select Visible Family.
- Select All Family: selects all type independent family instances all accross the project.
- Select Visible Family: selects all type independent family instances visible in the active view.
AlignGauge
- Bug causing an exception when insulation is selected has been resolved.
SlippedDuctTaps
- Now reports also Level Name of the elements.
TeeFixer
- Fixed the issue where the tool fails to set the height of the fitting instance correctly.
SheetBridge
- Resolved an issue where Space instances with their Space Type parameter initially set to Null would cause an exception during processing.
- ElementId type of parameters now exported as empty cells if they are set to Null.
- User can now empty an ElementId type of cell if he wants to set it to Null.
- the tool is now able to report all the cells that has faulty input and asks user to correct them.
v0.7.7
Build Date: 08.12.2024
SheetBridge
- Issue with "Preserve Schedule Formatting" option has been resolved.
v0.7.6
Build Date: 03.12.2024
SheetBridge
- UI allows Shift Select.
ZoomSelected
- Fixed the issue causing the tool throw an exception when no element is selected.
SelectFamily
- Fixed the issue causing the tool throw an exception when no element is selected.
SubComponents
- Fixed the issue causing the tool throw an exception when no element is selected when prompted.
Leapfrog
- Prompts you to select elements if no MEPCurve element is selected before starting the tool.
ToggleInsulation
- Refuses to function only when V/G Overrides Model is checked in View Template of the Active View.